Installation & Construction

**FlexScan OTDR with SmartAuto and LinkMap** Pocket-sized, Performance-packed, Easy to Use and Affordable FlexScan OTDRs enable both novice and expert technicians to quickly and reliably troubleshoot optical networks or fully characterize newly installed or repaired networks. Using FlexScan’s innovative SmartAuto mode, multiple OTDR scans quickly and accurately detect, locate, identify and measure network components and faults. After applying industry-standard or user-set pass/fail criteria, the characterized network is displayed using FlexScan’s intuitive, icon-based LinkMap view. **Features**: - Fast, accurate SmartAuto OTDR network characterization or fault location - Easy to understand LinkMap results with pass/fail indications - 1550 only or 1310/1550 OTDR - Rugged & pocket-sized; < 1 lb (0.4 kg) **Applications**: - Fast, accurate single-mode fiber fault location using OTDR and VFL - Single-mode optical network characterization using OTDR - Single-mode loss testing using integrated source & power meter

The CertiFiber Pro Optical Loss Test Set improves the efficiency of fiber optics certification. The Taptive user interface simplifies set-up, eliminates errors and speeds troubleshooting. A set reference wizard ensures correct reference setting and eliminates negative loss errors. Built on the future-ready Versiv platform, CertiFiber Pro OLTS provides merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro module. A convenient quad module supports both singlemode and multimode and is multimode Encircled Flux compliant. Copper certification and Wi-Fi Analysis and Ethernet troubleshooting modules are also available. Analyze test results and create professional test reports using LinkWare Management Software. **Key Features** - Versiv's modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection - Taptive™ user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors. - Fastest time to certify – two fibers at two wavelengths in three seconds. - Encircled Flux compliant as required by ANSI/TIA and ISO/IEC - Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber® Pro - ProjX™ management system ensures all jobs are completed correctly and efficiently - Convenient quad module supports both multimode and singlemode loss testing - Extended singlemode distance range to 130km - Built in Visual Fault Locator - Analyze test results and create professional test reports using LinkWare™ Management Software - Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ Cable Test Management Software.

The **DSX-602 PRO CableAnalyzer™**, including the rugged **Permanent Link Adapters**, is the tool for essential certification of copper, twisted pair structured cabling from Cat 3/Class C through Cat 6A / Class EA featuring speed, and reliability making you more efficient and productive – you can see the results on the bottom line. No other tester will deliver as consistently as the DSX-602 PRO. Its gesture-based user interface allows your techs to spend less time interpreting screens and more time testing. 500 MHz frequency range certifies Cat 6A/Class EA cabling for 10 Gigabit Ethernet in just 10 seconds. Advanced diagnostics pinpoint the location of a failure. Manage jobs and testers from any smart device over Wi-Fi with LinkWare™ Live. Features legendary Fluke Networks reliability backed by worldwide support. **Features** - Cat 6A and Class EA Copper Certification - Includes Channel Measurement Adapters for Cat 6A/ Class EA cables - Rugged Permanent Link Adapters with removable test plug - 10 second Cat 6A test time - ProjX™ Management System makes test setup fast and foolproof - HDTDX and HDTDR diagnostics pinpoint fault location - Integrates with LinkWare™ Live to manage jobs and testers from any smart device. - Quickly and easily create professional custom PDF reports with LinkWare™ PC.

The DSX2-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V – the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgraedable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare™ Management Software. Fluke Networks' DSX2-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe. **Key Features** - Versiv™ modular design supports copper certification, fiber loss, OTDR testing and Wi-Fi analysis - Unmatched speed for Cat 6A, Class FA and all current standards - ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly - Taptive™ user interface simplifies set-up, and eliminates errors - Analyze test results and create professional test reports using LinkWare™ management software - Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting - ETL Verified to IEC Level V – the most stringent accuracy requirement - Endorsed by cabling vendors worldwide - Built in Alien Crosstalk testing capability - Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ Cable Test Management Software.

The DSX CableAnalyzer Series copper test solutions enable testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Fluke Networks introduces the DSX2-8000 CableAnalyzer, the first field tester independently certified and endorsed to meet all the requirements for the Category 8 field testing standard. The DSX-8000 is the latest addition to the Versiv™ Cable Certification Family, continuing the Fluke Networks tradition of designing products to help data communications installers more quickly, accurately and profitably achieve system acceptance for copper and fiber jobs. **In reaching the milestone of the first Cat 8 field tester, the DSX Series has achieved a number of breakthroughs, including**: - The first Permanent Link and Channel adapters with a full 2 GHz range, allowing field certification of TIA Cat 5 through 8 and ISO/IEC Class C through FA and I/II (Class II adapters available Summer 2017) - The fastest test time: eight-second Cat 6A certification - The first tester to be endorsed by manufacturers of Cat 8 solutions. - The only tester able to test screen continuity along the path of the cabling as required for Level 2G testers. - The only tester capable of testing the optional resistance unbalance measurements critical for guaranteeing operation of advanced Power over Ethernet (PoE) systems

The Fremco DuctRod RAPID is specifically designed for pushing a duct rod into underground ducts, featuring a flexible clamping unit that enables attachment to the manhole's sidewall, ensuring a stable installation. With tool-free installation, the configuration and setup can be effortlessly deployed without the need for any tools, enhancing overall job efficiency and saving valuable time. The machine is adaptable to various manholes, providing a versatile solution for different scenarios. Its mechanized operation ensures effective rod pushing, contributing to improved efficiency and minimizing the risk of costly errors, especially for rods up to 25 mm in size. **Features** - Adjustable Torque Distance and Speed measurement for complete rod control - Rod OD: 9-25 mm - Duct size OD: 10-40 mm - Preparation time: 2-4 min - Pushing Distance: up to 500 m

**MicroFlow Touch - for Air blown Fiber Optic Cable** Of all fiber blowing machines on the FTTH-marked this machine is the only one designed with magnetic Buckle-detection that secure you and your customer high safety and quality. The Microflow is designed for air blown fiber and small fiber optic cables. So with this fully automatic fiberblowingmachine you secure fast and reliable optical fiberblowing. **Microflow Touch Specifications**: - Cable Diameter: 0,8 – 5,5 mm - Into Ducts : 5 – 16 mm - Fifer Blow Distance : < 2,5 Km - Max. Speed : 100 m/min

**MiniFlow RAPID - Fiber Optic Cable Blowing machine (Hydraulic driven)** With this smooth and compact looking blowing machine, you could handle cables and fibers from 4-12 mm and blow it into ducts at 7-20 mm. The Miniflow RAPID is a compact designed blowing machine that is very easy to handle and operate. **MiniFlow Rapid Specifications**: - Cable Diameter: 4.0 – 12 mm - Into Ducts : 7.0 – 20 mm - Fifer Blow Distance : < 3,5 Km - Max. Speed : 100 m/min

The enhanced version of **Multiflow Rapid** includes a new inlet guide and new flex block to accommodate a more user-friendly and tool free installation process. With the improved inlet and flex block, it is now possible to attach the flex block and inlet without using tools. The machines accommodate the fiber blowing engineer in the field as the parts can easily be adjusted with the use of hand knobs and easy click-in-’n’-out system. **MultiFlow RAPID** is designed for relining of multiple micro ducts, but it can also be operated for single cables. **MultiFlow Rapid Specifications**: - Fiber/Cable OD: 5.5-32 mm - Duct size OD: 10-63 mm - Preparation time: 8-10 min - Blowing distance (with air): Up to 5,000 m - Floating distance (with water): Up to 10,000 m

The enhanced version of **PowerFlow Rapid** includes a new inlet guide and new flex block to accommodate a more user-friendly and tool free installation process. With the improved inlet and flex block, it is now possible to attach the flex block and inlet without using tools. The machines accommodate the fiber blowing engineer in the field as the parts can easily be adjusted with the use of hand knobs and easy click-in-’n’-out system. The **PowerFlow RAPID** is easy to operate and designed for rough conditions. This hydraulic machine can blow a large variety of larger cables, fibers and ducts. **Powerflow Rapid Specifications**: - Fiber/Cable OD: 5.5-25 mm - Duct size OD: 10-63 mm - Preparation time: 8-10 min - Blowing distance (with air): Up to 5,000 m - Floating distance (with water): Up to 10,000 m

The Fujikura 45S is the essential splicer based on active clad alignment tehcnology with features, Fast Operation, User-frendly Design, Versatile Functionality and Consistent Quality. The 45s offers faster operation thanks to the simultaneous fiber preparation enabled by the SS05 double fiber stripper, the new AD-16A fiber adapter for the CT50 cleaver and the clever set plate mechanism of the 45S itself. It is equipped with a mechanism linking the wind protector and fiber clamp so when you open wind protector, the fiber clamps opens automatically. It is also equipped with retention clamps which are reputed by Fujikura's conventional fusion splicer models. The retention clamps prevent the fiber from jumping out after the fiber clamps are opened. These mechanisms work in tandem to provide easy fiber handling and a reduction in the time it takes to transfer the fiber to the heater. Active Fuse Control Technology takes into account the cleave condition and the fiber brightness during splicing, hence the arc is always adequate. Moreover, with regards to Active Blade Management, since the CT50 cleaver is connected to the splicer via Bluetooth, the splicer monitors the blade’s life in every position and height. This capability allows automatic cleaver blade rotation when the 45S judges the blade is worn. **Features** - Faster operation - User-friendly design - Movable LCD monitor - Easy sleeve positioning - Removable battery - Smaller footprint - Consistent quality - Active Fusion Control

In previous mass fusion splicer models, the v-grooves could become dirty over time due to debris and glass deposits from splicing accumulating in the v-grooves. Which in turn, could lead to fibre offsets and high losses if they were not regularly cleaned which added to the overall process time. The **90R12** comes with a first of its kind, innovative user replaceable V-groove assembly which makes this issue a thing of the past and is supplied as standard equipment with the 90R12 kit. This new V-groove assembly can be quickly and easily fitted in the field, minimizing downtime and maximising productivity. In addition, the new V-groove design enables splicing of both conventional type 12-fiber encapsulated ribbon and SWR (Spider Web Ribbon) whilst also accommodating 250um and 200um pitch fibers. The 90R12 can also splice single fibers if required. Overall working time has been significantly reduced against the previous model (70R+). This has been achieved through a combination of improvements; including the replaceable v-grooves, reaction time of the automated wind protectors and automated heater, a 5-inch LCD touch screen whilst also making use of Active Blade Management Technology, which now can connect to two CT50 cleavers simultaneously. **Features**: - Class-leading, highly reliable, 12-fiber ribbon splicing technology. - Replaceable V-grooves minimize downtime and maximize productivity. - An improved automatic wind protector design reduces overall splice time but can also be used manually like a traditional machine. - High capacity lithium-ion battery provides up to 165 x 12 fiber splices and heat shrinks. - An extensive range of fibre holders make the 90R12 compatible with single fibres, standard encapsulated ribbons as well as Spider Web Ribbon types. - Pitch Converter system enables splicing of both 200um and 250um single fibers. - A completely redesigned, larger capacity carry case and multi-functional work-tray. - Enabled with Fujikura's unique "Active Blade Management Technology" with new capability to link up to two CT50 cleavers simultaneously. - Tool-less replaceable elec

The **Fujikura 90S+** is a single fibre core alignment fusion splicer setting a new standard in the market for fusion splicing. The 90S+ is packed with a whole host of new and enhanced features specifically developed with the objective of enabling the user to work faster with higher precision. Overall splice process time has been significantly reduced against our previous model (70S+). This has been achieved with a combination of improvements to the reaction time of the automated wind protectors and automated heater, new fibre retention clamps, improved universal sheath clamps and a redesigned internal structure that matches the protection sleeve to the fusion splice point which enables splicing to be achieved without the need of the user to touch the 90S+ once the process has started. **Features**: - Active Fusion Control Technology (AFCT) - combining real-time fusion control with the cleave end-face analysis to determine the correct arc power to complete the splice. - Market leading high precision and accurate core alignment technology with advanced image processing technology - Improved automatic wind protector design which reduces overall splice time but can also be used in manual style - High capacity lithium-ion battery (up to 300 splices) - Patented easy splice protector positioning system - Universal sheath clamps for standard 250 um fibre but also 900 um loose tube fibre types. - Fibre Retention clamps - Enabled with Fujikura's unique "Active Blade Management Technology" with new capability to link up to 2 CT50 cleavers simultaneously. - A completely redesigned multi-function carry case and workstation - Tool-less replaceable electrodes - Touch screen

The new **CT50** Optical Fibre Cleaver is an improved complete cleaving product, offering increased operability and maintainability compared to any other cleaver of its kind on the market today. The CT50 provides enhanced drop and impact resistance and allows customers like never before to replace the actual cleaving blade and resin members that hold the optical fibres, dramatically reducing handling time and maintenance costs. With the ability to cleave single fibres and bundles of up to 12 fibres, the CT50 is Bluetooth enabled, smart phone ready, and can be easily integrated into existing splicing processes for customers looking to invest in a future-proof cleaving solution. **Features** - Highly robust - Automatic blade rotation via wireless communication - User replaceable blade and fibre clamps - One-action operation - including fibre scrap collection - Easy fibre positioning - Tool-less blade rotation

The **FID-30R** includes an optical power meter and succeeds the FID-25R while the FID-31R, the updated standard model, replaces the FID-26R. The fibre identifiers, used for identifying the light power presence in optical fibres, include three detecting functions: TONE, TRAFFIC, and ONU. Both models include a trigger operated clamp to macro-bend the fibre in order to leak light which is then detected by two photo sensors. The fibre identifiers can detect the presence of several kinds of light signal and indicate signal directions. The trigger lock function ensures the fibre is clamped with constant pressure, while the 2.4" colour LCD touch panel, equipped with a backlight function, allows the user to view the estimated optical power in the fibre and select the desired wavelength of 1310nm, 1490nm, or 1550nm. Identification of modulated tones at 270Hz, 1kHz and 2kHz is provided, along with continuous wave and ONU signals. Users are also able to select from three detection sensitivity modes; normal, fast and fine. Other features of the battery operated FID30R/FID31R include robust body design, easy-to-use fibre clamp, status indicator and adjustable settings for result retaining, buzzer volume, backlight brightness, auto dimming and auto power off. The fibre identifiers can be used for UV-coated fibre, 0.9mm diameter tight buffered fibre, fibre cord up to 3mm in diameter, and fibre ribbon with up to 12 fibres. **Features**: - Robust body design for the field - Universal fiber clamp design applicable for many types of fibers - 2.4" full color LCD touch screen with the backlight - Trigger lock function for continuous fiber clamping - Adjustable setting - Connector head for power meter is interchangeable - Firmware update via internet