Syes Broadcast

Compact FM transmitter, designed to work over all FM band and from 5,500 / 6,000 W. **Key Features**: - Frequency Agile Broadband 87.5-108 MHz (66 – 73 MHz Band available) - Modular and compact design: one chassis 4 RU. - FPGA processor based technology for Crystal Clear Digital Modulation. - Intrinsically redundant for high reliability with Hot Pluggable power supply - Overall efficiency more than 70% - Supports analogue, digital, MPX, AES EBU inputs - Supports IP input - Optional Input from on-board COFDM demodulator - Features Dynamic RDS coding embedded - Very low signal to noise ratio, extremely low distortion Programmable Derating Power (Plan when decrease your power or turn off your TX, hourly and weekly) - User friendly GUI. - Remote control via can bus, serial port, SNMP web pages and GSM option included (receive alarm status via email and Text message on your phone)

The **Air Cooled transmitters** line = SLIM Line offers air cooled TV transmitters, with one or more amplifier modules. The product lineup covers from low to high power levels, featuring excellent signal quality in compact size. SLIM Line is one of the “best Seller” of Syes, some of SLIM model are actually operating since the 90s. SLIM Line represents the state of the art of the low-medium RF transmitter technology. The SLIM Line models are available also as repeaters of the off-air signal, with a wide choice of operation settings, or as re-transmitter, with multiple inputs options. Transmitter configurations are based on single or multiple identical amplifier units (PA), SLIM type. The equipment layout depends on the desired output power level and operational requirements. The PA(s) are directly fed by the exciter. The choice of redundancy configurations can include dual drive (exciter std-by), passive reserve (1+1 or n+1) and more others. The **SLIM4 is the NEW 4 RU Amplifier solution** from Syes. It’s the brand new Compact AIR Cooled TV transmitters from the SLIM Line. In this configuration the SLIM4-03 it’s composed by one (1) PCM driver and three (3) SLIM4 4RU amplifier. The SLIM4_03 it’s a multimode and multistandard transmitter, transposer and repeater. High efficiency PPT option it’s always included. (PPT: registered proprietary mark, patented). The overall efficiency system goes up to 42%. **Key Features**: - Multistandard Transmitter: All digital / All analog in the same hardware - Compact solution PPT transmitter - Base inputs: 2x ASI Hitless switch, 2x SAT (S2 with CAMSlot), 2x Ethernet Hitless switch - Freq. agile with static or adaptive pre-correction (Linear and non linear) - BUILT in GPS receiver for SFN applications and more - Easy to use: web graphic interface GUI response - Up to several amplifiers housed in one 19” standard rack

**PCM line** represents the state of the art of the RF transmitter technology. It’s the unique investment exciter thanks to its capability to modulate in all Digital standard, TV and Radio as the TV analog too. PCM platform allows the standard change via software, it’s the perfect solution for broadcasters who are already in digital and need to take advantage of versatility in operation modes, configuration and performance, it’s the perfect solution for broadcasters who are still working on the digital transition. PCM can be an exciter, low power transmitter (UP to 200Wrms in 2RU), a regenerative transmitter, translator (integrated DVB-S2 receiver), Gap filler and Single Frequency Echo Canceller (perfect for Single Frequency Network), all in a single hardware. The **PCM 10** is a low power transmitter and Gap filler solution from PCM Line. In 1U rack module-19” std PCM 10 offers a digital power of 12,5 Wrms (COFDM / ATSC), 20 Wps (Analog power). (ATSC 3.0 READY, only software update needed) **Key Features**: - Multistandard Transmitter: All digital / All analog in the same hardware - Multimode platform: same hardware: System driver, low power transmitter, heterodyne transposer, regenerative transmitter, translator (integrated DVB-S2 receiver), Gap filler and Single Frequency Echo Canceller - Compact solution AB class Transmitter - Base inputs: 2x ASI Hitless switch (with BNC Connectors), 2x SAT (S2 with CAMSlot), 2x Ethernet Hitless switch - Regenerative and SFN Gap filler functionality - Freq. agile with static or adaptive pre-correction (Linear and non linear) - BUILT in GPS receiver for SFN applications - Easy to use: web graphic interface GUI response

Compact FM transmitter, designed to work over all FM band and up to 1000W **Key Features**: - Frequency Agile Broadband 87.5-108 MHz (66 – 73 MHz Band available) - Modular and compact design: one chassis 2 RU. - FPGA processor based technology for Crystal Clear Digital Modulation. - Intrinsically redundant for high reliability with Hot Pluggable power supply - Overall efficiency more than 70% - Supports analogue, digital, MPX, AES EBU inputs - Supports IP input - Optional Input from on-board COFDM demodulator - Features Dynamic RDS coding embedded - Very low signal to noise ratio, extremely low distortion - Programmable Derating Power (Plan when decrease your power or turn off your TX, hourly and weekly) User friendly GUI. - Remote control via can bus, serial port, SNMP web pages and GSM option included (receive alarm status via email and Text message on your phone)

Compact FM transmitter, designed to work over all FM band and up to 2,000W. **Key Features**: - Frequency Agile Broadband 87.5-108 MHz (66 – 73 MHz Band available) - Modular and compact design: one chassis 2 RU. - FPGA processor based technology for Crystal Clear Digital Modulation. - Intrinsically redundant for high reliability with Hot Pluggable power supply - Overall efficiency more than 70% - Supports analogue, digital, MPX, AES EBU inputs - Supports IP input - Optional Input from on-board COFDM demodulator - Features Dynamic RDS coding embedded - Very low signal to noise ratio, extremely low distortion - Programmable Derating Power (Plan when decrease your power or turn off your TX, hourly and weekly) - User friendly GUI. - Remote control via can bus, serial port, SNMP web pages and GSM option included (receive alarm status via email and Text message on your phone)

**PCM line** represents the state of the art of the RF transmitter technology. It’s the unique investment exciter thanks to its capability to modulate in all Digital standard, TV and Radio as the TV analog too. PCM platform allows the standard change via software, it’s the perfect solution for broadcasters who are already in digital and need to take advantage of versatility in operation modes, configuration and performance, it’s the perfect solution for broadcasters who are still working on the digital transition. PCM can be an exciter, low power transmitter (UP to 200Wrms in 2RU), a regenerative transmitter, translator (integrated DVB-S2 receiver), Gap filler and Single Frequency Echo Canceller (perfect for Single Frequency Network), all in a single hardware. The **PCM 100** is the 100 Wrms digital low power transmitter solution from PCM family. In just 2U rack module-19”std, the PCM 100 has a digital power 100 Wrms (COFDM / ATSC), 150Wps Analog TV. **Key Features**: - Multistandard Transmitter: All digital / All analog in the same hardware - Multimode platform: same hardware: System driver, low power transmitter, heterodyne transposer, regenerative transmitter, translator (integrated DVB-S2 receiver), Gap filler and Single Frequency Echo Canceller - Compact solution AB class Transmitter - Base inputs: 2x ASI Hitless switch, 2x SAT (S2 with CAMSlot), 2x Ethernet Hitless switch - Regenerative and SFN Gap filler functionality - Freq. agile with static or adaptive pre-correction (Linear and non linear) - BUILT in GPS receiver for SFN applications - Easy to use: web graphic interface GUI response