Fluke Networks - Official Distributor for Greece

The DSX-5000 Cable Analyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V – the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare™ Management Software. Fluke Networks' DSX-5000 Cable Analyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe. Listed prices are PER WEEK and do not include VAT (24%).

{clip:lipsum/1} Listed prices are PER WEEK and do not include VAT (24%).

**990DSL CopperPro™ Test Set** A next-generation field test set for subscriber loop fault identification and location and voice and data line qualification. - Replaces up to sixteen traditional test sets - Troubleshoots and qualifies lines for POTS, ADSL and other special services - Time Domain Reflectometer (TDR) feature allows precision fault location - Fast, accurate and easy to use - Compact, rugged and weather resistant In its basic configuration, CopperPro offers a broad range of Plain Old Telephone Services (POTS) troubleshooting, fault location and line qualification capabilities. Its Wideband/TDR option adds high frequency transmission testing and qualification functions for services like ADSL, HDSL, HDSL2, HDSL4, ISDN, T1, E1 and DDS. And the TDR feature of the option adds precise fault location and analysis. The Wideband/TDR option can be added at time of purchase or later at an authorized service center.

The DSX2-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V – the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgraedable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare™ Management Software. Fluke Networks' DSX2-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe. **Key Features** - Versiv™ modular design supports copper certification, fiber loss, OTDR testing and Wi-Fi analysis - Unmatched speed for Cat 6A, Class FA and all current standards - ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly - Taptive™ user interface simplifies set-up, and eliminates errors - Analyze test results and create professional test reports using LinkWare™ management software - Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting - ETL Verified to IEC Level V – the most stringent accuracy requirement - Endorsed by cabling vendors worldwide - Built in Alien Crosstalk testing capability - Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ Cable Test Management Software.

**Fluke Networks LinkIQ™ Cable + Network Tester** **Fluke NetworksThe LinkIQ™ Cable+Network Tester** is the testing solution to verify cable performance up to 10 Gb/s and solve network connectivity problems. **LinkIQ** validates cable performance using frequency-based measurements and provides distance to fault information along with a wire map of the cable under test. The **LinkIQ** also performs nearest switch diagnostics to identify key network issues and validate switch configuration eliminating the need of using another device. Additional features include Analog and Digital Toning, Port Blink, 802.1x authentication, Remote Office Locators, and the ability to manage results via LinkWare™ PC. The **LinkIQ™** is capable of measuring lengths up to 1000 feet (305 m) and provides distance to faults such as opens, shorts, and unterminated cable. Using the remote ID allows for a complete wire map of the cable pairs which helps identify miswired and split pairs. The primary cable testing feature of **LinkIQ™** is the cable performance test which qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s). It performs these tests via frequency-based measurements. Using IEEE-standards-based measurements ensures that tested links meet performance requirements as opposed to transmission testers which only prove that the specific test devices can communicate over the link. **Key Features & Specifications**: - Generates Analog or Digital tones compatible with the IntelliTone™ Probe or Pro3000™ to assist in locating cables in a wall or telecommunications room - Blink Port light on switch to help identify the connected switch port - Compatible with MicroScanner™ PoE Remote Identifiers for Ethernet outlet identification - Touch Sensitive gesture-based color display - Rechargeable Li-Ion battery - RJ45 Port - PASS/FAIL frequency-based measurement results - Length measurement shows distance to termination, open or short - Wiremap shows type and location of fault (miswires, split pairs, shorts, breaks) - USB-C port for data export, software updates and charging - Cable “Speedometer” provides bandwidth information up to 10G - Save up to 1000 test results on the unit and export to LinkWare™ PC

The DSX CableAnalyzer Series copper test solutions enable testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Fluke Networks introduces the DSX2-8000 CableAnalyzer, the first field tester independently certified and endorsed to meet all the requirements for the Category 8 field testing standard. The DSX-8000 is the latest addition to the Versiv™ Cable Certification Family, continuing the Fluke Networks tradition of designing products to help data communications installers more quickly, accurately and profitably achieve system acceptance for copper and fiber jobs. **In reaching the milestone of the first Cat 8 field tester, the DSX Series has achieved a number of breakthroughs, including**: - The first Permanent Link and Channel adapters with a full 2 GHz range, allowing field certification of TIA Cat 5 through 8 and ISO/IEC Class C through FA and I/II (Class II adapters available Summer 2017) - The fastest test time: eight-second Cat 6A certification - The first tester to be endorsed by manufacturers of Cat 8 solutions. - The only tester able to test screen continuity along the path of the cabling as required for Level 2G testers. - The only tester capable of testing the optional resistance unbalance measurements critical for guaranteeing operation of advanced Power over Ethernet (PoE) systems

The CertiFiber Pro Optical Loss Test Set improves the efficiency of fiber optics certification. The Taptive user interface simplifies set-up, eliminates errors and speeds troubleshooting. A set reference wizard ensures correct reference setting and eliminates negative loss errors. Built on the future-ready Versiv platform, CertiFiber Pro OLTS provides merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro module. A convenient quad module supports both singlemode and multimode and is multimode Encircled Flux compliant. Copper certification and Wi-Fi Analysis and Ethernet troubleshooting modules are also available. Analyze test results and create professional test reports using LinkWare Management Software. **Key Features** - Versiv's modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection - Taptive™ user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors. - Fastest time to certify – two fibers at two wavelengths in three seconds. - Encircled Flux compliant as required by ANSI/TIA and ISO/IEC - Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber® Pro - ProjX™ management system ensures all jobs are completed correctly and efficiently - Convenient quad module supports both multimode and singlemode loss testing - Extended singlemode distance range to 130km - Built in Visual Fault Locator - Analyze test results and create professional test reports using LinkWare™ Management Software - Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ Cable Test Management Software.

The **DSX-602 PRO CableAnalyzer™**, including the rugged **Permanent Link Adapters**, is the tool for essential certification of copper, twisted pair structured cabling from Cat 3/Class C through Cat 6A / Class EA featuring speed, and reliability making you more efficient and productive – you can see the results on the bottom line. No other tester will deliver as consistently as the DSX-602 PRO. Its gesture-based user interface allows your techs to spend less time interpreting screens and more time testing. 500 MHz frequency range certifies Cat 6A/Class EA cabling for 10 Gigabit Ethernet in just 10 seconds. Advanced diagnostics pinpoint the location of a failure. Manage jobs and testers from any smart device over Wi-Fi with LinkWare™ Live. Features legendary Fluke Networks reliability backed by worldwide support. **Features** - Cat 6A and Class EA Copper Certification - Includes Channel Measurement Adapters for Cat 6A/ Class EA cables - Rugged Permanent Link Adapters with removable test plug - 10 second Cat 6A test time - ProjX™ Management System makes test setup fast and foolproof - HDTDX and HDTDR diagnostics pinpoint fault location - Integrates with LinkWare™ Live to manage jobs and testers from any smart device. - Quickly and easily create professional custom PDF reports with LinkWare™ PC.